{"id":237610,"date":"2023-09-07T18:21:06","date_gmt":"2023-09-07T18:21:06","guid":{"rendered":"https:\/\/automotobuzz.com\/?p=237610"},"modified":"2023-09-07T18:21:06","modified_gmt":"2023-09-07T18:21:06","slug":"best-torque-wrenches-2023","status":"publish","type":"post","link":"https:\/\/automotobuzz.com\/car-reviews\/best-torque-wrenches-2023\/","title":{"rendered":"Best torque wrenches 2023"},"content":{"rendered":"
\n<\/p>\n
It\u2019s easy to think of torque wrenches as tools only for professionals, but even a simple job like changing a wheel is done better \u2013 and with less risk of failure or damage \u2013 if you use one.<\/p>\n
There\u2019s a whole host of other jobs that are in the same league, such as brake, engine or suspension work. And a torque wrench won\u2019t break the bank \u2013 decent tools can be had for well under \u00a340.<\/p>\n
So there\u2019s no doubt you need one, but which should you buy? We put 10 through their paces to find out.<\/p>\n
With the help of Draper Tool\u2019s quality assurance department, we assessed accuracy based on the BS EN ISO 6789 standard which takes readings at 20, 60 and 100 per cent of the tool\u2019s range.\u00a0<\/p>\n
Five tests were done at each level after \u2018exercising\u2019 the wrench with a handful of pulls beforehand. An average was taken and we looked for it to be within the standard\u2019s plus or minus four per cent tolerance. We also looked at ease of use, whether the wrench could measure in both directions and looked for metric and imperial scales. Fine ratchets also gained marks, as did calibration certificate and extras. The final factor was price from online sources.<\/p>\n
<\/p>\n
Halfords is a multiple winner in this test, but the firm has taken a different route with its latest offering. It has rejected the common 40-200Nm or so range and gone for 60-300.\u00a0It might miss some lower settings, but the extra length makes hitting the bigger numbers easier.\u00a0<\/p>\n
The push-through drive means it can work in both directions, and it has a very easy-to-use setting window. It was just outside its claimed three per cent tolerance at 20 per cent, but within it at the higher readings. Not cheap, even at this discounted figure, but very good.<\/p>\n
Buy now from Halfords<\/strong><\/p>\n <\/p>\n This is the first of the tools that look like they\u2019re all from the same factory, but it proved to be among the most accurate, only pipped by the Clarke. It was very accurate at the lowest level and only marginally outside the four per cent tolerance at the other two.\u00a0<\/p>\n It has a relatively fine ratchet and the black-on-chrome twin scales are easy to read. Less good is the lack of a calibration certificate and ability to keep the instructions in the case, but at this price it still makes a lot of sense.<\/p>\n Buy now from Amazon<\/strong><\/p>\n <\/p>\n The black Draper stands out in a sea of very similar tools, but the colour, plus white markings for the scale, makes setting the wrench easy. And when it was set, it proved pretty accurate, particularly at the lower settings.\u00a0<\/p>\n It was a little further outside the four per cent at its maximum than the Amazon tool, which gave its rival the edge. It does come with a calibration certificate and instructions that could be kept in the case, but the ratchet has just 24 teeth.<\/p>\n Along with the 300, this is the other half of the Halfords line-up, dealing with lower settings. It was a shame to see it uncomfortably outside its three per cent tolerance at the lowest setting, but it was easily inside it at the mid level and a touch over at the maximum.\u00a0\u00a0<\/p>\n It has the same large handle as its stablemate, with a scales window and a high-quality feel, plus a push-through drive to measure in both directions. Like the Model 300, it is currently discounted (this time down from \u00a3139.99), but its appeal is limited by its restricted range.<\/p>\n Buy now from Halfords<\/strong><\/p>\n <\/p>\n Like the Halfords pair, this comes in a foam insert for storing in a tool chest but, unlike them, there\u2019s no additional plastic case. It\u2019s a touch longer than the lookalikes and has easier-to-read metric and imperial scales although, as on others, the latter is in less-than-helpful fractions.\u00a0<\/p>\n The setting lock is good, although there\u2019s a knack to holding the collar while turning. It has a fine 72-tooth ratchet and the wrench was within the torque tolerance throughout. A high-quality tool, but the lack of standalone storage hurts its overall placing in a tight field.<\/p>\n Buy now from Amazon<\/strong><\/p>\n <\/p>\n Things move slowly in the torque wrench world and, like the Draper, this is a returnee from our last test. Despite its age, it was the most accurate in the tests, easily inside the four per cent tolerance and just one per cent out at the 60 per cent measure.\u00a0<\/p>\n Uniquely here, it has an extension and 3\/8-inch drive converter \u2013 handy but not enough to overcome other aspects, including the relatively coarse 24-tooth ratchet. It also lacked a calibration certificate and was one of the few with no imperial scale. Accurate but flawed.<\/p>\n Buy now from Machine Mart<\/strong><\/p>\n <\/p>\n A test debut for Northern Ireland-based Jefferson, which clearly sources its tools from the same place as others here. The calibration certificate is apparently filled out by the same tester as the Draper.\u00a0<\/p>\n The tool has a 24-tooth ratchet, but its biggest problem is having no imperial scale, ruling it out for owners of many British classic cars. It was always within tolerance, but it was not enough to overcome the price \u2013 around twice that of very similar tools.\u00a0<\/p>\n Buy now from Sam Turner & Sons<\/strong> <\/strong><\/p>\n <\/p>\n Despite the name, this is only a little more than 27 inches long, but the extra length over most rivals is welcome for its 345Nm maximum. And it was most comfortable at its maximum, getting inside the tolerance. At the other two points, it was outside, struggling most at the lowest level.\u00a0<\/p>\n It has a fine, protected, 72-tooth ratchet, and metric and imperial scales. However, the former \u2013 and most common \u2013 is a nightmare to set, with graduations down to two decimal places.\u00a0<\/p>\n Buy now from Screwfix<\/strong><\/p>\n <\/p>\n <\/p>\n It may have a new design, but Halfords retains its crown with a wrench that\u2019s good to use and hard to fault, apart from its cost. If your needs can\u2019t justify the Halfords\u2019 price tag, Amazon and Draper provide good alternatives for under \u00a340. The former is a touch more accurate, but the black Draper is easier to use.<\/p>\n Now you know which torque wrench to turn to, find out which <\/em><\/strong>workshop hand cleaners are best\u2026<\/em><\/strong><\/p>\nAmazon Basics 1\/2 Inch Drive Click Torque Wrench<\/h2>\n
\n
Draper 64535<\/h2>\n
\n
\n<\/p>\n\n
Sealey Premier STW904<\/h2>\n
\n
Clarke CHT141<\/h2>\n
\n
Jefferson JEFTRQWRH1-2B<\/h2>\n
\n
DeWalt Torque Wrench \u00bd\u201d x 30\u201d DWMT75462<\/h2>\n
\n
Also tested:<\/h2>\n
King Dick KST2040<\/h2>\n
\n
Magnussen BX2200AW<\/h2>\n
\n
Verdict<\/h2>\n
\n