MOT: Halfords recommends to clean number plate before test
When you subscribe we will use the information you provide to send you these newsletters. Sometimes they’ll include recommendations for other related newsletters or services we offer. Our Privacy Notice explains more about how we use your data, and your rights. You can unsubscribe at any time.
Plates fitted to cars from 1 January should conform to the new BS AU 145e standards, mandatory from 1 September. According to the BNMA, all plates fitted on models registered after 1980 must comply with the new standards.
The rules mean motorists would be issued fines for having incorrect plates which do not meet the new requirements.
However, the BNMA said the new standards “go even further” to ensure public safety and security.
The new plates will have near-infrared contracts which will make them more adaptable to run with ANPR cameras.
Two-tone or 3D effect fonts are also no longer allowed under the new standards to ensure plates can be read more easily by the cameras.
These cameras can scan car number plates and check this alongside a database to check for road offences such as tax offenders.
According to the BNMA: “ANPR cameras read plates by looking at the contrast between the digit and the plate background.
“This contrast is read in the near-infrared (NIR) spectrum, similar to infrared or ultraviolet.
“The new rules make sure all plates can be read in NIR.
Number plates have changed for electric cars – don’t get caught out [INSIGHT]
Drivers can be fined £1,000 for driving with a dirty number plate [ANALYSIS]
Breaking number plate rules may see drivers issued large fines [COMMENT]
“The NIR test is repeated at various points during the accreditation process.”
Meanwhile, the new plates are harder and more resilient meaning they will be less easily damaged.
New plates will undergo an abrasion test to make sure they stay clear and easy to read at all times.
This will protect them against repeated exposure to dirt, road grime and jet washing which can sometimes fade the letters.
Technical dimensions for number plates will also change under the new rules.
The space between the bottom of the registration mark and any other mark must not be more than seven millimetres.
Outlet Artworks can only be one shade of a non-reflecting colour while optional borders must be at least 5mm or thinner.
Under the changes, optional borders must not infringe closer than 10mm from the edge of any registration digit.
The BNMA said both the new and previous standards will be allowed on cars up until 31 August 2021 to help motor traders transition between the rules.
New changes for 2021 have also put an end to GB designs on number plates.
According to the BNMA UK vehicles must also show a GB oval when travelling overseas.
Source: Read Full Article